Lollipop Stabilizer Fins for 2in Potato Canon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stabilizer fins to allow a lollipop to fly like a dart.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
These stabilization fins are quick to print and easy to hot glue onto the stick end of a lollipop. When shot out of a 2 inch diameter spud gun, the fins will stabilize the lollipop in flight and will vastly improve accuracy. They're likely a one time use, unless the lollipop has a soft landing. Print with 100% infill.
You will need some kind of gas seal loaded behind the lollipop. I recommend using mine: https://www.thingiverse.com/thing:3667127 A wad of paper towels might suffice.
Instructable on how to make a spud gun coming soon! I'll put the link here as soon as I finish it.
Print Settings
Infill:
100
Category: DIY