1 / 2
Gridfinity 1x5 tray for large desoldering pump ("NL813", "Big Desoldering Pump", "Solder Puller", similar to "Soldapullt").
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 1x5 Gridfinity nest for a bigger-than-average desoldering pump (IYKYK).
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 1x5 Gridfinity nest for a bigger-than-average desoldering pump (IYKYK)... It's usually blue and yellow.
The plunger hangs off the edge of the tray, which allows this tray to be printed on most printers. Otherwise, the tray would need to be 1x8 (336 mm wide!). This also allows for a low tray to sit under overhanging plunger.
A raw STL low-density mesh of the desoldering pump is included (note, the tip in the scan is rather short, as it's a well used pump, and I didn't bother to attach a fresh tip).