Minor Adjustments for the "Adjustable Length Bead Loom" by AArteLS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Few changes to the model to make it easier print and accommodate different hardware
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the Adjustable Length Bead Loom by AArteLS, which is very similar to Rick's Beading Loom. It is almost perfect, except I did not have the same harware on hand. So I made few changes.
I enlarged holes to accommodate 10mm diameter aluminum rods and 2 mm wire rod. I made the holes through for the rods on the rear piece (traseira) so I do not have to cut the rods to length. With tight tolerances it was a snug fit and I did not need to glue anything. I also got rid of fillets on some parts as they were making a messy print.
Unfortunately I did not have access to a 3D modeling software at the time so I used prusa slicer's negative volume objects to modify the print. I am uploading those project files for anyone who wants to try them.
I printed mine out of Overture PETG in Magenta and Prusament PETG in Chalky Blue. All parts printed at 0.1mm layer with 20% Gyroid infill. I used supports for peg holes and central holes where needed.