BarkBuster Plastics Handlebar Clamp thingys
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extra clamp pieces for BarkBuster handlebar protection plastics.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
I purchased some BarkBuster plastics for my motorbike handlebars a year or two ago and noticed that they only supplied clamps for one of the two mounting points (each). I had a slow weekend recently and copied the original clamps in onshape and printed up extra clamps for securing the plastics to the BarkBuster bars.
They're a very quick print. I dd mine in ASA (because that's what I had on my printer at the time and I'm exceedingly lazy). PETG would also work just as well. I'd suggest steering clear (no pun intended) of PLA as it'd be a bit brittle.
I used three perimeters and 100% rectilinear infill. They are a very small and very quick print.
You'll need a couple of extra mounting screws to match the originals - from memory they were 8G x 12mm
The attached pics show the (black injection moulded) original part and my red supplementary parts. Mine are way cooler IMHO ;-)