Siku Control front box with lid 1:32
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box which can be mounted on Siku 1:32 tractors
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 149
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Standard Digital File License
When you are using some tools at the back hitch of the tractor, the tractor is not able to drive nice because of missing friction on the steering axle.
With this box you can put some screws or nuts in to enable a good handling of the tractor.
The Box will need some support at the mounting triangle, i made normal supports from 45 degrees.
It is optimized to have a very robust triangle connection and for easy printing. You will need no other parts to assemble the lid, just push the cones carefully into the holes.
The lid is optional. I printed it standing in the back side with only a brim to have the best material properties. When assembled, it will have some resistance before fully opened.
Would be happy to see your makes!