1 / 1
Simple Bass Finger Ramp 60x107x9.5mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Simple Bass Finger Ramp for my specific bass measured 60x107x9.5mm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
A Simple Bass Finger Ramp for my specific bass guitar measured 60x107x9.5mm
The width is 60mm in between the two Bartolini Mk 1 pickups.
The 9.5mm height might be a little bit too high for some people but just make your own adjustments.
To mount it, i opted to use double sided tape adhesive for a non-permanent set up as I might want to take it off in the future.
