Eiffel Tower in Parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I tried to fix most of the errors in the original version so that the tower was OK.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 339
- Wydruki
- 2
- Wyświetlenia
- 973
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I tried to fix most of the errors in the original version so that the tower was OK. Three test prints came out fine for me, so I'm publishing them, because more heads, more knowledge :-).
I simplified the original model to three parts, because in larger printers there is no problem with that.
If there would be a problem in smaller ones, we will adjust ;-) .
The dimensions that suit me and that I publish here with the printing profile are the base 13x13cm and the total height 35cm .
Finally, everything is glued together with glue, although it holds even without it.
I am also adding print profiles for P1S and K1.