1 / 6
Made for 15120 aluminum extrusion. Make t-nuts / t-bolts out of regular 1/4"-20 hardware using this printed adapter v1.0 — zdjęcie 1
1 / 6

Made for 15120 aluminum extrusion. Make t-nuts / t-bolts out of regular 1/4"-20 hardware using this printed adapter v1.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made for 15120 aluminum extrusion. Make t-nuts / t-bolts out of regular 1/4"-20 hardware using this printed adapter v1.0

Ocena
0 / 5
Polubienia
3
Wydruki
0
Wyświetlenia
115
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools

Printing tips:

  • PLA
  • print as oriented
  • supports: yes (I used normal supports, nothing special, just switched it on)
  • for max strength, consider printing “solid” by raising either the number of perimeter walls or the percent of infill

I did a DIY fence upgrade for my table saw, using “15120” aluminum extrusion (15 mm thick x 120 mm tall x 1 meter in length):

Purchase link for the 15120 aluminum extrusion I used: https://www.aliexpress.us/item/3256808024116694.html   

I used mostly ¼"-20 bolts and nuts, and also some amount of M5 screws and M5 t-nuts.

I made t-nuts / t-bolts out of regular 1/4"-20 hardware using this printed adapter, as shown here: 

I also used a printed “Pentelobe” star knob that I designed and modeled, which is now available here: https://www.printables.com/model/1175820-pentelobe-star-knob-for-14-20-nut-or-hex-head-bolt 

The star knob is available in two sizes, medium and large, and the large is available in both normal and deep variations, as seen below.

Large:

Large Deep:

Medium:

Regarding the table saw fence upgrade, I saved a lot of time by leveraging the excellent design work of @stuffimade_99005 — the guy behind the @stuffimade channel on YouTube. He posted a great video about his table saw fence upgrade, and I bought his models available here: https://stuffimade.gumroad.com/l/DIYFenceSystemsFiles 

Although I did have to remix some of the parts to fit my saw, and obviously I designed some parts of my own along the way, by starting with his excellent design it was way, way better than starting from scratch!