CR Battery Shaped Holders (2450, 2032)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Great for Battery Daddy or other battery organization containers. This 3d model will store 8 CR2450/CR2032 batteries…
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 89
- Wydruki
- 1
- Wyświetlenia
- 535
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Great for Battery Daddy or other battery organization containers. This 3d model will store 8 CR2450/CR2032 batteries in a holder the same size as a D-Cell battery, or 8 CR2032 in a holder the same size as a C-Cell battery. Coin batteries are held in by friction and can be easily pushed in and out of the holder.
Printed with supports to preserve the battery shelves.
Note, not all coin batteries are the exact same thickness, this model assumes your batteries are about the standard (CR2450) 5mm / (CR2032) 3.2mm but you may need to adjust it for your situation.
Category: Other