All in one for (tr)uSDX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
After getting hooked on 3D printing and getting a better overview of FreeCad, I thought it would be good to make a "complete" unit for my (tr)uSDX's so that they are a little more connected.First I made a box for the Nano tuners and then I had to come up with something for the battery and radio. The "original" battery box for the (tr)uSDX had a nice sliding groove so I drew the opposite one on the top of the tuner box so that the battery box can be pushed in and stuck. Also made a holder for the radio so that it does not slide out sideways but must be pushed into its holder. This holder also got a sliding groove so that it is stuck on top of the tuner box.
Recommend that you turn on support when printing the radio holder, it has a small hanging edge that needs support.
(Working on making boxes for other types of mini antenna tuners that will fit into the same slot type)
The original battery slider can be found here:
https://www.printables.com/model/103619-housing-for-trusdx-qrp-transceiver