Gridfinity Divider for UltraLightBin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a divider for Gridfinity containers
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 253
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The models in this project were created to be used as a dividers for Gridfinity UltraLightBins to prevent content mixing between sections when placed inside the Modern Gridfinity Case.
The naming convention was adapted to the UltraLightBins naming convention.
<columns>x<rows>_<nr of divided spaces horizontally>x<number of divided spaces vertically>
Configurations:
I did not include options for 1x1 containers as the original models cover that, but I have included dividers for containers 1x2, 2x1, 1x3, 2x2, 2x3, 3x2 and 3x3.
The number of divided spaces varies from 2 up to 5 depending on the container dimensions and the configuration I found reasonable.
If you need something which is not included here, text me and I may include some other configurations.
Print Settings and Material:
No supports needed or brim.
PLA and PETG works great.