1 / 2
SeeStar S50 Tripod Counterbalance Parts — zdjęcie 1
1 / 2

SeeStar S50 Tripod Counterbalance Parts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer and spindle for attaching a DIY counterbalance to a SeeStar S50 Tripod

Ocena
0 / 5
Polubienia
5
Pobrania
42
Wydruki
0
Wyświetlenia
601
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Spindle and spacer for a do-it-yourself tripod counterbalance (to counterbalance a SeeStar S50 mounted on an equatorial wedge such as the Skywatcher Adventurer). The 3D-printed parts are the spindle ("barbell core") and a spacer disk (to sandwich the angle bracket between the tripod and the equatorial wedge). In addition to these two 3D printed parts, you need a weight (such as a 5 pount barbell), a strong angle bracket 4" by ¾" (which will probably need to be drilled-out to fit over the tripod mounting bolt), and a bolt (¼"-20 X 1.5") with nut.

Tagi