1 / 2
HSW Display for the House Atreides Royal Ornithopter Kit Card
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple peg that replaces the loading ramp from the Ornithopter to display it on the HSW wall.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 190
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Simple peg that replaces the loading ramp from the Ornithopter to display it on the HSW wall.
Step 1: Remove loading ramp from model
Step 2: Install mounting peg on HSW with one of the insert-empty.stl mounts
Step 3: slide model onto the mount using the slot formally occupied by the loading ramp
Printed fine in default upright orientation using no supports despite warning about cantilevered overhang