135 35mm x3 film case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by this design:https://www.thingiverse.com/thing:1750288 I decided to remake in a more compact form and also…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 175
- Wydruki
- 2
- Wyświetlenia
- 1078
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by this design:
https://www.thingiverse.com/thing:1750288
I decided to remake in a more compact form and also faster to print as three roll config.
On my version the lid has a very tight fit, so if your printer is not well calibrated for clearances you may need to do some scrapping or tweak your horizontal expansion for a perfect fit.
There are two versions of the lid one blank and the other with 135 X 3 text.
At 0.2 should take 4 to 5hrs to print both parts.
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
No
Supports:
Yes
0.2
Infill:
25
Notes:
If you want the text version of the lid with a cleaner look you may use support, or you can flip and print without as you prefer.
Category: Camera