1 / 4
Ski Boot Replacement Heel Puck/Strike for Full Tilt Ski Boot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement heel for ski boot brand Full Tilt. Also should work with K2 brand boots, but haven't been able to confirm.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Share Alike
My wife's ski boot heels wore down and it was very hard to find replacement heels. I modelled this off the worn heel.
Notes:
- I chose 100% infill due to constant impact and wear of the heel while walking.
- Used PETG
- Didn't include a tread texture, although I am sure one can be applied. considering it's a hard ski boot, I wasn't horribly concerned about traction. So far, it hasn't seemed much less grippy.
- Picture attached is after half season of skiing at a resort.