Plant House Plant Shelf for Rise Gardens (Gen 1/2/3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Provide your houseplants with the extra light from your Rise Gardens with this houseplant shelf.
- Ocena
- 0 / 5
- Polubienia
- 16
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Standard Digital File License
Provide your houseplants with the extra light from your Rise Gardens with this houseplant shelf. It's designed to attach perfectly to your gardens shelves and you can use up to 6 per garden. Designed to fit 8 inch plants.
Compatibility: Rise Garden Gen 1, 2, and 3 (Gen 1 aka Family Garden)
Max Load: 10lbs
Our other Rise Gardens Accessories
Don't Have a 3D Printer?
We have them available for purchase at krayft.com.
Printing Instructions
Print with PLA or PETG. Make sure to print the correct version for the garden you have.
Layer Height: 0.28mm
Infill: 20%
Perimeters: 3-4
Remove the integrated supports, one on each side. They should snap off with minimal effort.

Installation Instructions
PDF Installation instructions can be found in the files section.