Magic The Gathering (MTG) - Commander Deck Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A deck holder designed to fit 100 single-sleeved MTG cards in the library with smaller spaces for grave and exile.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 159
- Wydruki
- 1
- Wyświetlenia
- 1254
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This deck holder was designed to reduce tabletop space used during MTG Commander games. It has the following features:
- Library platform for 100 single-sleeved cards
- Grave platform for ~40 single-sleeved cards
- Exile platform for ~30 single-sleeved cards
- Side pocket for ~15 single-sleeved cards
- Front Commander pocket for 1 single-sleeved card
- This DOES NOT FIT top loaders
The sleeves used here are Dragon Shield - Snow - Matte Dual Sleeves (https://www.dragonshield.com/en-us/p/snow-dual-matte-sleeves/AT-15005).
For specific card size fits, please refer to the sketch image. All measurements used are in millimeters (mm).
Note that the images uploaded are of the V1 print that uses a different platform for the library. This platform tended to fall out of place if lifted, and V2 fixes this by making it the same platform as the Grave with a small notch to lock it in-place. V1 files are uploaded for reference, it's recommended to print V2.
The body should be printed with supports for the “bridges” on the sides. The supports should be easy to remove.