1 / 2
MTG TCG Card Divider Organizer with WL-1050 Address Label V2 — zdjęcie 1
1 / 2

MTG TCG Card Divider Organizer with WL-1050 Address Label V2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

New Version of the MTG TCG Card Divider Organizer with WL-1050 Address Label This is a bit wider at 73mm x 92mm+15mm

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
2
Wyświetlenia
271
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

New Version of the MTG TCG Card Divider Organizer with WL-1050 Address Label
This is a bit wider at 73mm x 92mm+15mm per my friends' specs to fit his MTG box.

So redid this version with basically square windows, tried to optimize this for time and less filament

Print at .25mm layers so less time, around 46-50min on my MK3S+ per divider 4 on a print bed is what I have. 

MAJOR NOTE:********

The model is upside down, so you'll need to flip it on it's back. the label is at 2mm and the body is 3mm so if you try printing it as is, it will not work. It's just how I did it by accident in F360 and was tired at that point, so I didn't care to change it after I had already cut the holes in it.

Or use my Gcode they are the proper direction.

Tagi