5m Tape measure holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5m Tape measure/digital level holder
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 123
- Wydruki
- 2
- Wyświetlenia
- 410
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Remodel from pegboard version link below.
Firstly I removed the pegboard holder aspect and added 4 x 4mm holes as I was looking to mount onto wooden shed wall.
It became obvious once printed that this was for much larger tape measures than my meagre 5M ones or my digitl level
So back to the drawing board (fusion 360 and Prusa slicer. I find it easier to resize on Prusa slicer when not scaling the whole model uniformly)
When remodel in Fusion I also added holes for the metal tape ends and raised the height of the partitions.
I have added the first remodel for larger tape measure wall mounted version but this does not have the second remodelling extra's
remodel from https://www.thingiverse.com/thing:3709429