Olympus BH-2 Trinocular camera adapter tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter tube to connect a T2 camera to an Olympus BH-2 trinocular head.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This 3d printed part is complementary to Carl Hunsinger's instructional video on adding a T2 camera mount on your Olympus BH-2 trinocular microscope (below).
It replaces the MTV-3 adapter and the other 3d printed part in Carl's video. It is a press-fit install over the trinocular head with a small lip to make it square. I made it so it would be parfocal with the helicoidal focusing mechanism retracted. Results may vary, height can be adjusted in the SCAD model.
You will still need to purchase a NFK lens, a M42 to M42 helicoidal adjustment mechanism (30 mm of range is sufficient), and two M42 to T2 male to female adapters.
Printed in PLA matte black.