Typhon v7 Top Dome Pod w/SMA

This top pod holds my HappyModel Fyujon ExpressLRS receiver and VTX. Fits the v7 Typhon FPV racing frame top plate, which is the standard size version (not the Long or Extra Long versions you can get with the v8). I've tried taping it down to the top plate but it just gets sand in it and comes loose anyway so I just have it crammed in the dome under the strap bit.

2.4GHz receiver antenna hole on the side for mounting a dipole antenna (use some B7000/E6000 to secure it). The link quality is better using a dipole than the ceramic onboard antenna and I have broken off a couple of the ceramic ones inside the previous version of this design and you hear them rattling around and you start microfailsafing on the far end of the track 😅

Rear hole fits a TrueRC Singularity stubby antenna mated to an SMA pigtail. The SMA pigtail used is one of the nice ones with the bar and two mounting holes on the sides, not the SMA with just a hex bolt shape on the inside end. This allows swapping the antenna to LHCP if MultiGP decides on a whim to require you to.

I use B7000 to glue down the u.FL connectors to the Fyujon because I have had some crashes knock them off. I hit things pretty hard.

• 0.25mm layer height
• As many perimeters as needed to make it solid. The walls are 2mm. I use 4 perims of 0.44mm
• Support needed on the flat bottom of the SMA connector (see image)