round vice - 3 point clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vice for round objects. A simple design with 3 clamps and a screw.
- Ocena
- 5 / 5
- Polubienia
- 108
- Pobrania
- 816
- Wydruki
- 6
- Wyświetlenia
- 4284
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
To be able to clamp round parts i designed a 3 point clamp that can be printed. Its not that easy to print since good tolerances and strong parts are needed. Better tolerances lead to less play and therefore better clamping.
I used 4 outer lines and 25% infill with 0.6 nozzle for the parts. I used ABS but PLA or PETG will definitely also work. PLA is much stronger than most people think. I attached 2 pictures that show my printing orientation. The top and bottom part are designed in a way that the middle hole will be printed closed. Therefore the printer will add 1 Layer of bridging there to generate a nice overhang. This single layer can be opened after printing with a drill, pen knife e.g.
The attached gcode files are only to show some of my print settings. I printed them much faster on my voron but this site here wont take it because of my Start code. So I added my mini+ settings if you want to look at them.
The Parts will be connected by a M4x38 /40 screw. Lubrication might help but i didn't need it.
In the future I will maybe also add different shaped clamps.
Happy printing ;)