Takamine TK4NT Acoustic Guitar Preamp Replacement Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for a broken housing for a Takamine TK4NT Preamp
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 380
- Wydruki
- 1
- Wyświetlenia
- 3128
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
The frame of the housing of a Takamine TK4NT acoustic guitar preamp broke, so that the preamp was no longer fixed in the guitar. I designed a replacement housing.
Printing
I printed the design on a i3 MK3 using PETG, layer height 0,15mm.
Procedure
Take the preamp out of the guitar. Remove the old housing from the guitar by removing the 4 clamps. Unscrew the two Jacks of the circuit board from the old housing and insert it into the printed replacement. Glue a foam rubber pad to the bottom of the replacement housing to fix the battery.