N-Scale Roco 25099 crane tender car mount and lift hook replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
N-Scale Roco 25099 crane tender car mount and lift hook replacement
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 692
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Second hand Roco N Scale crane came without a mount for the beam on the tender , and the hook was missing.
Created a replacement , and fdm printable on slow speed. ( might need a few tries )
made to rotate ( use M2 or M3 boult and nut ) , and can be glued in place .
baseplate fits on about anything, can also be used without the baseplate , rotation will still work.
STL and GCODE provided
Resize the hook to what your printer can take, 35% was doable for me.
I have added a V2 version, what allows you to make a lower , slightly wider profile ,
poles can be 2mm boult / nut , so as the turn-connection.
( but also a plug included in the print )