1 / 4
GBO die shell Re-forming Re-calibrator  9mm tube adapter — zdjęcie 1
1 / 4

GBO die shell Re-forming Re-calibrator 9mm tube adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter for GBO Dies Re-forming Re-calibrator 9mm to be connected to the die to let the shells come out in…

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is an adapter for GBO Dies Re-forming Re-calibrator 9mm to be connected to the die to let the shells come out in a basket.

In the second drawing I added a compensation ring to lean on the press, but if you want I put the separate drawing also.

Update 2.0: new version much stronger with 4 holes for the grains


Questo e' un adattore per il Dies trafilatore della GBO per 9mm per far uscire i bossoli in un cestello.

Nel secondo disegno ho aggiunto un anello di compensazione per appoggiarsi alla pressa, ma se si vuole ho messo il disegno separato anche.

Update 2.0: nuova versione molto piu' forte con 4 fori per i grani

Print Settings

Printer:

R2 Evo

Rafts:

Doesn't Matter

**Supports:**

Yes

Resolution:

0,25

**Infill:**

20%

Filament: Amazon PLA PLA

Category: Sport & Outdoors

Tagi