Battery Base for Fiber Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows use of an Amazon 18560 battery holder/charger to power the Fiber Lamp. Uses any ESP32.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Larger base made to hold an 18650 battery set, and charge them. Plugs in to USB Micro and C, passthrough charging, and uses ANY WLED programmed board to control the lamp.
Battery Charger/Holder:
https://www.amazon.com/dp/B0CJQZ2CLS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Also, the board from: https://www.printables.com/model/1177871-zled-4-channel-wled-controller can be used. There is a mount location for that PCB cut into the part. The PCB is included in the zipped file attached to that project.
Or simply glue in any ESP32 board holder into the case and line up the hole for the USB C/micro port on the front.