Whistle with FAB Lab logo MMU2 multi color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First Multi material multi color print off of my first prusa mk3S with my first MMU2 thought I would post it here.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 292
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Whistle with FAB Lab logo MMU2 multi color - First Multi material - multi color print off of my first prusa mk3S with my first MMU2 thought I would post it here. This was designed and and printed prior to the latest version of pursa slicer where I could have just painted on the colors. So each different colored section is separate to be able to set the colors for the MMU2.
I designed the whistle in Fusion 360 after watching many videos and looking at many different whistle designs. The ball is built inside and all you have to do is take a small screw driver and knock it off its base through the whole. :)
I made 20 on the build plate to cut out wasting filament on the wipe tower - and gave them as Christmas presents to all my friends at the FABLab.
printed at .2 layer height support only on build plate.