1 / 1
Raspberry Pi 3B/4B Case with Noctua NF-A4x20 5V Fan for ikea skadis — zdjęcie 1

Raspberry Pi 3B/4B Case with Noctua NF-A4x20 5V Fan for ikea skadis

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The primary goal of this remix is to add a mounting system compatible with the IKEA SKÅDIS pegboard

Ocena
0 / 5
Polubienia
4
Pobrania
19
Wydruki
0
Wyświetlenia
218
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

This remix is based on the original Raspberry Pi 4B Case with Noctua NF-A4x20 5V Fan. The primary goal of this remix is to add a mounting system compatible with the IKEA SKÅDIS pegboard, making it easy to attach or detach the case from the board as needed.

Key Features

IKEA SKÅDIS Compatibility

  • Added hooks/brackets designed to fit the standard hole spacing of the SKÅDIS board.
  • Multiple mounting orientations (vertical, horizontal, or angled) are possible.

Optimized Cooling

  • Retains the mounting space for the Noctua NF-A4x20 5V fan to provide efficient, quiet cooling for the Raspberry Pi 4B.
  • Internal geometry ensures unobstructed airflow.

Sturdy Construction

  • The robust design from the original case is maintained, offering reliable protection for your Raspberry Pi.
  • Reinforced hook/clip system to securely support the case and fan when mounted on the pegboard.

Easy Access to Ports and Cables

  • All Raspberry Pi 4B ports (power, HDMI, USB, Ethernet, audio jack) remain accessible.
  • Space at the back allows for neat cable management, leveraging the SKÅDIS board’s perforations.

Modular Assembly

  • Printed in separate parts (similar to the original project), plus an additional SKÅDIS bracket module.
  • Individual parts can be replaced or upgraded without needing to reprint the entire case.

Printing and Assembly Tips

  • Material: PLA+ or PETG is recommended for a balance of strength and printability.
  • Infill: A 20–30% infill generally suffices; for extra sturdiness around the SKÅDIS hooks, consider up to 40%.
  • Supports: Most parts should print without supports, but pay attention to overhangs on the hooks/brackets.
  • Fan Installation: Follow the original instructions for mounting the Noctua fan. Ensure proper clearance when attaching the back plate with the SKÅDIS brackets.
  • SKÅDIS Mounting: Once assembled, line up the hooks with the board’s holes and press firmly. Use additional zip ties or clips if you want extra security.