1 / 9
Roof Magnetic Mount for Seeed Studio Meshtastic SenseCAP Card Tracker T1000-E — zdjęcie 1
1 / 9

Roof Magnetic Mount for Seeed Studio Meshtastic SenseCAP Card Tracker T1000-E

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Magnetic car mount for little Seeed T1000-E Meshtastic radio

Ocena
5 / 5
Polubienia
42
Pobrania
244
Wydruki
2
Wyświetlenia
3486
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

I just started playing with Meshtastic radios. I ordered a bunch of different ones. So far I like these the best:

The T1000E is the size of a credit card and is IP65 waterproof. I made this magnetic mount so I could throw it on my car roof. The bluetooth signal seems to go thru the roof OK. I put it with the thin section pointing forward/backwards. It stayed on the car at 65mph.

I printed it in PETG and super glued the magnets in

I made a little friction fit door that keeps the T1000E from flying out when you pull it off the roof :-)

The *.3mf file has painted supports for the four battery areas. You don't need support for the roof.

FTC Disclaimer: We may earn commissions for purchases made through the links above. As Amazon Associates we earn from qualifying purchases.

 

Tagi