MMU3 Angled support w/ Cable Holders MK4 / MK4S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of 15° legs for the MMU3 with small downwards recess for enclosure clearance, with cable management to the frame.
- Ocena
- 4,75 / 5
- Polubienia
- 16
- Pobrania
- 48
- Wydruki
- 4
- Wyświetlenia
- 472
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
In the process of my enclosure design, I want my MMU(3) devise to fit under de top, inside the enclosure. But to limit the never ending height it needs, I design those legs at 15° (Which I do not take credit for.) and also an offset behind the frame, to save almost 23mm in height (I take credit for.) and yet still be able to see what filament is selected. I also manage to keep the original filament number selector front plate which is inserted in between the legs without the need for fasteners. The clearance under the legs is still there of course with the help of the little brace for the cable. (2 zip-ties to hold the cable in place, tho 1 hold well enough like on the picture) The 4 screws from the original legs are kept for the new ones.
The top cable clip fits in place the same way you install the filament holder on the frame, or the MMUs. The one clip on the side, is bolted with 2 M3x6mm long, tho 1 screw could hold strong enough. The holes are slotted so you don't need to completely removed the screw to remove the clip. (I take credit for those 2 clips.)
So far, I am please with the draft. (D2) Should stay final. Printed in PETG, Gyroid 15% infill, 0.2 layer.