Filament Sensor Funnel (Insertion Guide) for the PC4-M6 Flex Filament Sensor Bypass
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A funnel shaped filament insertion guide for PTFE tubes which can be screwed in to M6 Ruthex heat-pressed inserts.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Some would consider the process of feeding flimsy filament through a 2mm hole less than ideal. Surfalex2000 published a remix of a filament guide which simplifies this process.
Adding flexible filaments to the mix, it is further challenging as the sensor bearing generally impedes pushing it through the stock side filament sensors on the XL. Fyrby Additive published a remix of the flex filament bypass that accepts heat pressed M6 Ruthex inserts and PC4-M6 ptfe connectors.
This remix combines both concepts, thus allowing for 50% less PC4-M6 connectors, while maintaining ease of filament feeding.
Print with the threads facing up. Brim is optional - only as needed.