Soda Stream Bottle Hanger - Fuse - Compact - Slight Tilt
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a soda stream bottle hanger. Reduced the top overhang, reduced the overall depth, and tilted it back 1 degree.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
These are wall / ceiling / under mounts for 1L Soda Stream slim bottles like the current Fuse bottles.
They are a remix of HansiV's original design. I really liked theirs, but in my situation I was mounting them under a bar edge so needed to reduce the top overhang. I also tilted the arms back 1 degree so that the bottles would stay on more securely, and I also found that with the slim Soda Stream Fuse bottles (and the 1 degree tilt), they didn't need as much depth so reduced it by 10mm (distance between the tip of the arm and the large flat back).
I printed them on their back (arms facing up), no supports, PLA+, 10% infill.
Stuck them to the wall with 3m command strips.