1 / 3
Lid - Harbor Freight Tactical Ammo/Utility Box (SKU 64113) — zdjęcie 1
1 / 3

Lid - Harbor Freight Tactical Ammo/Utility Box (SKU 64113)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Two separate opening lid halves, with a more snug fit & stronger latches than the original.

Ocena
0 / 5
Polubienia
7
Pobrania
18
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Split top lid for the 64113 harbor freight utility box. You may need to run the latch portion of the printed parts under some hot water to get a good fit on the latches if your box is as warped as mine. These boxes are not made to hold much weight…

Print Settings

  • Layer height: 0.2mm
  • Material: PLA works great, but PETG/ABS recommended
  • Infill:  40%+
  • Supports: Required for angles >60deg

The dividers inside are a remix, see here: https://www.printables.com/model/1193471-divider-harbor-freight-tactical-ammoutility-box-sk 

Harbor Freight Box: https://www.harborfreight.com/tool-storage-organization/tool-boxes-bags-belts/tactical-ammoutility-box-64113.html

 

 

 

Tagi