Rode lavalier mic clips (TPU print)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Various Rode lavalier mic clips
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed these Rode Lav mic clips so I can have better "wearability" of the mics.
U-shaped serves as a clip.
I-shaped serves as discrete mic hidden under clothes. You need to use some tape to hold it on the skin. This should provide best audio quality (if you don't wear too many clothes over the chest).
Print from TPU or other FLEX material.
Recommended print orientation and supports on the picture.
My print settings:
- printer: Prusa MK4S
- layer height: 0.2mm
- sheet: satin
- nozzle diameter: 0.4mm
- print orientation: as on the picture
- material: Fiberlogy FiberFlex 40D
- supports: as on the picture
- brim: Not required (but depents on your printer, bed, etc.)
- perimeters: 3
- solid layers (top/bottom): 5/4