Hyper Light Drifter mod for Dummy 13
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Drifter from Hyper Light Drifter made on Dummy 13 v1.0 base
- Ocena
- 5 / 5
- Polubienia
- 68
- Pobrania
- 142
- Wydruki
- 1
- Wyświetlenia
- 1268
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fan-made models for HLD inspired me to try and turn them into a full action figure using Dummy.
I included only modded parts here, for everything else please use originals/included links - dummy13v1, blank chest, trigger finger hand.
Most pieces will require support and/or adhesion. Pieces oriented the way I printed them. SwordHandle and DroidPink include small supports bc they were easier to remove.
Sword is the only part that requires glue.
May have trouble with fitting Feet+Booster together!! Check tolerances, if all else fails - sand or resize. I had Booster printed out of PLA break, so preferably use ABS (as with general Dummy guidelines).
Droid doesn't have a base, I used long wire so it wouldn't be too visible in photos. But you do you.
For outfit:
Skirt is simple trapeze x2 - including seam allowance, roughly 3cm top x 4.5cm height x 4.5cm bottom + ribbon belt and stencil painted pattern.
Cape is three layers of washed cotton fabric with unraveled edges - roughly 10cm wide x 8.5cm tall, orange slightly bigger than red, collar is separate piece 3cm x 9cm folded in half, placed on top.
Edit: accidentally uploaded wrong versions of HelmVisor and DroidBlue, it's fixed now! Sorry about that >.>"