IM Gib Melson v.1 (Mold+Master)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fishing lure made for mainly targeting pike and musky. Master, Mold and Silicone mold all included!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 175
- Wydruki
- 0
- Wyświetlenia
- 449
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Standard Digital File License
📃 IM Gib Melson v.1 (Mold+Master) 📃
Master size: 205mm
Mold size: 255x73x49mm
Injector hole size: 16mm
💬 CONTACT INFORMATION 💬
Any and all feedback is appreciated. Feel free to CONTACT ME
Having problems with my files, or just want a simple adjustment? CONTACT ME
I also do commissions/payed jobs 💰. CONTACT ME for more information.
💰 DONATE 💰
Like my work? Send me a PayPal Donation
⚠ IMPORTANT ⚠
1. Only use a resin or fillament that is made for high temperatures!
2. I recomend doing 10-12 layers wall thickness for FDM-prints.
3. Dont use excessive pressure when using a injector.
4. Dont pour/inject plastisol above ~180 °C (355 °F) when using a 3D-printed mold!
5. Keep your mold at around ~50°C (120°F) trough out the prosses for best result.
6. If the mold gets cold to fast it will create dents, shrinkage and air pockets in the plastisol.
7. Always use some form of mold release spray, oil or grease on the mold before using it.
8. Only apply a thin layer spray/oil/grease ("less is more")
9. First run will usaly come out the worst.