1 / 5
Erster Schleifklotz für 90Grad Winkel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Erster Schleifklotz für 90Grad Winkel
- Ocena
- 3,5 / 5
- Polubienia
- 308
- Pobrania
- 625
- Wydruki
- 2
- Wyświetlenia
- 4413
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (457)Powiązane
Teile drucken und wie dargestellt montieren
Zusätzlich benötigt wird
2 x Schrauben M4x16
2 x Muttern M4
Schleifpapier zurechtschneiden: 40mm x 256mm
Schleifpapier in der Mitte falten und den Stift einlegen und beide Seiten festklemmen.
Print parts and assemble as shown
Additionally is required
2 x screws M4x16
2 x M4 nuts
Cut sandpaper to size: 40mm x 256mm
Fold the sandpaper in half and insert the pin and clamp both sides.