GoPro Dummies - With Ballast Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are basically just gopro models, but in printable STL form with big cutouts in the back. Getting the right…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- GNU General Public License v2.0
These are basically just gopro models, but in printable STL form with big cutouts in the back.
Getting the right amount of ballast is tough. Good choices are either fishing lead, tire balancing weights or just go get yourself a roll of pennies. Put in enough that it weighs less than the actual device, leaving room for some glue.
Pro-Tip: Glue in ballast with goop or e6000. Only enough to hold it in and let it dry overnight at least (2 days is better) Then, fill the rest of the way with hotglue while it's on a scale to get the perfect weight. GOOP/E6000 evaporates a lot and gets lighter as it dries. HotGlue stays the same weight.
Shouldn't matter what material you print this in or what infill settings you use. Obviously thicker infill means less ballast and more strength. I've printed a few in TPU and they come out really well and are pretty easy to cram into gopro mounts/foam wings/etc. They don't replicate the feel of a real gopro though, so I tend to print them in PETG or PLA now.
These are modded models from grabcad: https://grabcad.com/library/gopro-hero4-session-1 and https://grabcad.com/library/gopro-hero-5-black-1
Category: Sport & Outdoors