Raspberry Pi 3 Malolo Case Wall Mount and Pi Camera on Ball Joint
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for the Raspberry pi 3 case with a ball joint for mounting the pi camera.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 122
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed the press fit ball joint as a solid piece to make sure it doesn't get compressed and loose. I put in 5 mm holes because those worked with some drywall screws I have on hand for wall mounting.
This gives access to all ports except the sd card slot is pretty well blocked on the raspberry pi 3. The press fits hold the camera securely and the ball join allows you to align the camera how you want it to be aligned.
In the future it would be nice to make this a two piece print, but working for now!