1 / 6
Cupid's Arrow Incense Holder And Tray (Magnetic & Non-Magnetic) [Valentine Special] — zdjęcie 1
1 / 6

Cupid's Arrow Incense Holder And Tray (Magnetic & Non-Magnetic) [Valentine Special]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Valentine's spin on a minimalist incense holder and tray. Support for a shot and long incense stick.

Ocena
0 / 5
Polubienia
45
Pobrania
150
Wydruki
0
Wyświetlenia
690
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Standard Digital File License

 

Note: Non-Magnetic Version Also Available

Note: Non-Magnetic Version Also Available

 

 

Valentine twists on my minimalist magnetic incense holder. Perfect for a little home decor.

  • Easily swap the incense stick and align the incense stick back with the removable magnetic incense holder.

  • The tray conveniently catches any ash from the incense stick making cleanup easier—no more messy floors or shelves.

  • Holder supports two incense positions. Choose one that the incense does not exceed the tray.

Fig: shows the lower incense stick exceeds the tray. This will cause the ash to fall outside the tray.

 

Prints tested with:

  • PLA

  • 0.2 mm Layer height.

  • 5% Infil (3D-Honeycome).

  • Variable layer height for smoother curves on both models.

Supports:

  • Needs support for the back part of the heart.

  • Support from the built plate is enough.

Magnet:

  • Magnet size measured:

    • Diameter: 5.95mm

    • Thickness: 2.92mm

  • You need 2 magnets, one for each model.

  • Pause the print in your preferred slicer on the first layer that starts to cover the magnet hole. 

  • Insert the magnet and continue the print. (Careful with the orientation of both magnets)

If you are feeling romantic, you could even let your significant other insert the magnet 😉.

 

 

 

Feel free to share your prints!

Happy Printing!

 

Technical Note: 

  • The magnet slot is 1mm high from the floor for the holder model, and for the tray, 0.5mm from the surface.

  • Both magnet slot's dimensions are

    • Diameter: 6 +0.1mm

    • Thickness: 2.9 +0.1mm

Consider Supporting!! Your support will allow me to continue sharing my design.

buymeacoffee.com/supanut.tho

Edit:

  • Replacing the wrong version of the Tray model. (09/02/2025)

Tagi