1 / 1
Replacement legs for 32" TCL TV model number 32S305 — zdjęcie 1

Replacement legs for 32" TCL TV model number 32S305

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

There are two files, a left and a right. Note: these legs probably don't match the original height of the factory legs.

Ocena
0 / 5
Polubienia
2
Pobrania
45
Wydruki
0
Wyświetlenia
151
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I designed these legs after I lost mine. It took a couple hours so I imagine if anyone (unlikely) will ever need to replace the legs on their 32" TCL TV with the model number 32S305, I'd share the file and save them a little time.  If anything, they may be useable for other projects. they're just some legs, you could print 2 regular and 2 mirrored for things that need 4 legs.

Note: The screw holes are 3.5 mm wide, a little bigger than the screws that I needed, but some extra play made lining up the screw holes easier. The recess for the head is about 8 mm wide

Print tips:

I used PLA

0.2mm layer height

3 walls

Infill is a little tricky, I selected 90% density, however I entered “10” into “gradual infill steps”. This saves a ton of material, time, and allows for the print to be strongest near the top where the screws are. keep in mind printing them in their regular orientation could cause an issue with layer separation at the screw mounts. if you want to be safe, use the highest infill you can where the screws mount up.

I'll add photos soon

Tagi