1 / 2
Laser Jig for Alloy Business Cards — zdjęcie 1
1 / 2

Laser Jig for Alloy Business Cards

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A four-slot jig for alloy business cards to be lasered

Ocena
0 / 5
Polubienia
9
Pobrania
49
Wydruki
0
Wyświetlenia
274
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Made this for my gantry laser to reliably position and hold ~86x55mm alloy business cards. They have a tendency to warp when a design has a lot of area and they get hot.

Holds on two sides for a 54.5mm width. Clearance of holding slot is .2mm.

 Slides in without effort. Thumb slot for easy removal. 

Fits on 256mm x 256mm print bed.

Tagi