1 / 5
PARKSIDE 12V cordless screwdriver battery SLOPED holder / Wallmount — zdjęcie 1
1 / 5

PARKSIDE 12V cordless screwdriver battery SLOPED holder / Wallmount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PARKSIDE 12V cordless screwdriver battery SLOPED holder / Wallmount

Ocena
0 / 5
Polubienia
11
Pobrania
69
Wydruki
0
Wyświetlenia
244
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

SLOPED wallmount battery holder for the 12V PARKSIDE Performance (Bauforum24 Edition) cordless screwdriver.

The base is 60x70mm. The angle between mount and baseplate is 25° which allows a more comfortable use depending on the place of action and may meet your needs more than the standard version.

It has 4 outer 5mm screwholes to be mounted very stable in every workshop environment. There is also a 5th screwhole in the middle which is exactly 20mm horizontally away from the upper 2 screwholes. This gives you the possibilty to mount this holder on every 20x40 / 20x60 aluminium construction profile as shown on the picture.

The pictures also show an examples with GREEN and RED prints to indicate FULLY LOADED and EMPTY batteries. 

If you need any changes please let us know. THX.

Have fun!

Material: PETG
Layerheight: 0.3mm or better
Infill: 25%

Tagi