Lockout/Tagout Security Swivel E14-E18 Neozed-Diazed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Neozed-Diazed Lockout Device to ensure the VDE Second Safety Rule "Secure against Reactivation"
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 660
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal Lockout Device to make sure that the VDE Second Safety Rule for electricians is observed: "Secure against Reactivation"
To work safely on electric installation devices, you not only have to remove the related screw-in fuses (Neozed or Diazed), but have to ensure nobody will unfortunately or unintentionally screw them in again. This LoTo Devices will meet the requirements. After having screwed them in, you can arrettize them against removal by either a rod with a loop or a wire rope (recommended: 1mm, completely coated with plastic), pressed to a loop, and your personalized padlock.
The Swivel consists of 3 parts, so you can choose the color of the parts yourself, no need for a multi-material-unit.
No supports needed; they are included in the stl. Break them away with a needle-nose-plier; if you are a perfectionist, you can carefully clean the print with a cutter knife (and remember: ALWAYS CUT IN DIRECTION AWAY FROM YOU.)
The middle ring has a chamfer on the upper inner side: this side goes direction E14-E18-threads!
To assemble the whole thing, it might be necessary to give it some careful small impacts with a hammer - the tolerances are narrow intentionally, so this device will never fall apart again, no need to use any glue!
* * * Work safely * * *