Mountbase/cover Busch Jaeger switches for TuYa Smart switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mountplate wil attach to your Busch Jaeger switch base, so you can stick a Tuya smart switch on it.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 1261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
In my smarthome I use Tuya zigbee 4 Gang switches, that were mounted above the normal Busch Jaeger switch, but the switches look different and you don't use the original switch anymore, so it's a bit obsolete, but wanted to keep it, in case of….
And to keep people from using the “old” switch, thus rendering your smart stuff useless I made a mountingbase for the Tuya Zigbee Smart switch 4gang TS004F and TS0044 (the 1, 2 and 3 gang should work also, they are the same size.
You have to remove the covers of the Busch Jaeger switch and get the clip part off the switchplate, mount the clip in the printed base and place it on the base in the wall.
Stick the Tuya switch on the mountbase.
You can also use it to cover the whole switchbase.
Based on: https://www.thingiverse.com/thing:4653241