Hadley Telescope: Tubes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another approach for threaded tubes for the Hadley Telescope
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 608
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I moved this out of Hadley Telescope Mods to prevent it to become to big and confusing because of many different topics.
Another approach for threaded tubes. I added an extra part besides the well known A/B/C tubes types from the original Hadley telescope tube subassembly - Vase mode, the tube holder.
I printed three of these. Two are going on each side of the UTA and one on top of the LTA. The A/B/C tubes are flexible enough to squeeze them through the rods. I printed one A tube, two B tubes and one C tube to assemble a full length tube. The tube holder on top of the UTA is to hold the cap. The cap fits on the tube holder, the small side of A tube and on C tube. I realized later, that the cap doesn't fit because of the collimation screws. So I added another A tube on top.
Printed with PETG, 0.4 nozzle, 0.20 mm SPEED profile on a MK4S.
Please note: It's not compatible with the original. Also, do not print any of the parts in vase mode.