1 / 3
Another kit to keep the (tr)uSDX / ATU (ATU-10-0A) / batteries in one unit — zdjęcie 1
1 / 3

Another kit to keep the (tr)uSDX / ATU (ATU-10-0A) / batteries in one unit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

Another kit to keep the (tr)uSDX / ATU (ATU-10-0A) / batteries in one unit

Please note that the plastic may shrink a little and that the sliding slots may become a little tight on the ATU box, I solved this by lightly sanding with sandpaper and filing down the two small pins that are meant to hold them in place. The one in the pictures is printed with Layer height 0.2 and 15% fill and PLA

Recommend that you turn on support when printing the radio holder, it has a small hanging edge that needs support.

The original battery slider can be found here:
https://www.printables.com/model/103619-housing-for-trusdx-qrp-transceiver

 

Tagi