1 / 11
4 in 1 filament adapter Flashforge adventurer 5M/5M Pro — zdjęcie 1
1 / 11

4 in 1 filament adapter Flashforge adventurer 5M/5M Pro

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is my version of 4 in 1 filament adapter for 3d printer flashforge adventurer 5M or 5M pro with using 3DChameleon.

Ocena
3 / 5
Polubienia
117
Pobrania
391
Wydruki
1
Wyświetlenia
5482
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

For fixing ptfe tubes i use metal fittings from old festo push-in fitting (with plastic shell, its easy destruct plastic shell and take out push-in fitting). is it small and lightweight. fittings press inside with vise, not with hammer (it can be damaged-like mine). 

example of push-in fitting

print with no support.

9.2.2025 update - version with 0,1mm larger holes for easier pressing fittings

16.2.2025 update -added taller version2 with different holes in different angles. this version need support on buildplate.

17.2.2025 update - added adapter for clippy cuting system. support on buildplate only. (https://www.tinkercad.com/things/94imRkAFDme-ffad5m-3d-chameleon-auto-clippy-v1)

25.2.2025 update - after some labour, added new version of 4in1 adapter with 1/8" thread and 

adapter print upside down with support only on buildplate.

this adapter is compatible with my design of auto clippy for adventurer 5M.

i have my design for hanging 3d chameleon on flashforge riser.

Tagi