Razer Huntsman Stabilizer Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a replacement Part for the Razer Huntsman Tournament Edition, specifically for the Spacebar Key. It will probably…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 298
- Wydruki
- 1
- Wyświetlenia
- 2131
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This a replacement Part for the Razer Huntsman Tournament Edition, specifically for the Spacebar Key. It will probably work for other Razer/Huntsman Models.
As I broke my stabilizers under the Keycap of my Spacebar I tried DemuxLabs File, but realised it was the wrong part.
Thus I created my first file in Autodesk Fusion 360. I hope I can contribute positively to this Community in the Future as well.
Feel free to improve,to criticise and or remix the File.
Orientate and support File as needed by your Printer Type and Model.
Feel free to like or leave Feedback
Print Settings
Printer:
Elegoo Mars 2 Pro
Rafts:
Doesn't Matter
Doesn't Matter
Resolution:
100%
100%
Filament: Elegoo Abs Like Clear None Clear (Tinted Black)
Notes:
Printed on an SLA Printer with and without supports in 90-45-0° Orientations. (Upright works due to low Suction force)
Will probably Work on a FDM Printer with a thin nozzle as the parts are quite small.If it doesn´t fit sand down the cross section and sides.
Category: Replacement Parts