Hotone Ampero 2 Stomp box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hotone Ampero 2 Stomp box with 1 input and XLR stereo out
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hotone Ampero 2 Stomp box with 1 input and XLR stereo out.
Printable withoust support
I used two stereo jack to XLR adapter cables(30cm) and an input jack from Thomann.
I also used a right angle adapter IEC C14 Male Plug to C5 from aliexpress (angled up!)
I used 4 heat press inserts M3x4x5, but you can use normal M3 nuts.
You need about 30 M3 screws. I recommend at least 20mm lenght.
Box printed from PETG, other things from ASA, but any filament should hold!
I recommend at least PETG if you will have this box in your car.
Split the model in your slicer!
Also it is 309mm long so should fit on a CR10 or similar machine.
It incorporates this footswitch with double sided tape:
https://www.printables.com/model/906870-box-dual-footswitch-hotone
And uses a variation of this box:
https://www.printables.com/model/258431-rugged-box-parametric